Conrad GX103+GPS Provozní pokyny Strana 1

 OPERATING INSTRUCTIONSGSM-GPS Tracker with Alarm Function„GX103+GPS“Item No. 66 24 93Version 07/12

10e) Notes on the Electrical Connection• The external cables must be kept as short as possible and remaining line lengths must not be coiled.• Too-str

11c) SIM Card Insertion• The SIM card with the PIN number “1513” must be inserted in the device as shown in the following.• When the SIM card is inser

1210. Configuration via Text Messagea) General InformationTo receive the full functional scope of the product, it must be configured first. The entire

13A parameter may be the following:List: The customer may choose a parameter from a pre-defined list, e.g.: DE, EN, LH, HL, LHL,…Writing: <DE/EN>

1411. Functional DescriptionsIn the following examples, it is assumed that the PIN of the SIM card in the device is “1513”.a) General Configuration Co

153. Setting the language (Command “LANGUAGE”)This command sets the product langauge.SET LANGUAGE <DE/EN> #1513Example:SET LANGUAGE DE #1513This

165. Administration of Phone Book (Command “TEL”)Up to 6 phone numbers can be programmed into the device. In case of alarm, a notification text messag

17Deleting the phone numbers savedTo delete a phone number, you need the following commands:Example: Deleting the 1st and 3rd numberRESET TEL1 #1513RE

187. Speaker Events (Command “SOUNDINFO”)During the setup phase, it may be of benefit to hear what the product does right now. In may places of the fi

199. Time Setting Alarm Activation/Deactivation (Command “COUNTDOWN”)The alarm function is also changed, e.g. directly at the device using the left bu

2Table of ContentsPage1. Introduction ...

20b) In- and OutputsThis is an autonomously working alarm reporting device. Wrong settings or connections can cause undesired txt messages to be senta

212. Setting Support (Command “DIAGNOSE”)For the sensors to be easier to configure, this command was introduced. After activation, this function contr

22The following functions are possible:• Function: Phone numberYou may assign a phone number to either of the three buttons. If you want to assign the

23c) Additional Functions1. Recall in Case of Alarm (Function “RECALL”)When an event triggers an alarm in the “ALARM ENABLE” mode, an alarm text messa

24The “INCALL” event can trigger the following actions:Return GPS/GPSMAP position:To save costs, use the “INCALL” function to return the current GPS p

253. Lifesign (Function “ALIVE”)For some providers, the SIM card is deactivated if no costs have been incurred within a specific period (e.g. 3 months

2612. Configure ExpansionsThis lateral 2.5 mm jack socket serves to expand the product with various accessories. There are some items to be observed:•

2713. Position DeterminationThe GPS receiver can be used to determine the current GPS position. Furthermore, the user is able to be informed when the

28b) Submission of a Web Link with GPS Position (Command “GPSMAP”)If you have a mobile phone with internet connection, you may also have the current G

29d) Activate Position Tracking (Command “TRACK”)The term “tracking” means regular saving of the current position, including time stamp, in the intern

3Page13. Position Determination ...

30Deleting data:To delete all data and release the memory for new recordings, the follwong command is used:RESET TRACKDATA #1513e) Programming the GPS

31The following message is returned for confirmation:GX103GPS 1.08GPS zone: 1/1 < — Zone numberLatitude:49.549680N to 49.537480NLongitude:011.92478

3214. System FunctionsThis chapter describes technically sophisticated functions. The default settings are already set for most application areas. The

3315. Factory SettingsThe device can be manually reset to the factory settings when:• the device no longer reacts• the PIN number in the device was fo

3418. Technical Dataa) GSM-GPS-TrackerCharge cycle ... approx. 3h (after complete battery discharge)Re

35

 Legal NoticeThese operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).All right

42. Intended UseThe product serves to monitor your property. To secure your property, sensors like vibration, motion detectors (PIR), microphone and a

55. Safety InformationThe guarantee/warranty will expire if damage is incurred resulting from non-compliance with these operating instructions.We do n

67. General DescriptionsThis product is to be used to monitor the customer’s property. In case of alarm, its primary task is in informing the customer

7GSM LED (5):This LED shows the current GSM status. For this, the LED has the following presentation options:• LED is lit green = Searching for GSM ne

8Left button (6):This button switches the alarm mode of the product. The change is triggered only after pushing and holding the button for a few secon

9b) Product Status and ModeThe product has the following modes:“Alarm Enable”:This mode is entered by the text message command “ALARM ENABLE”, pushing